Shore trees / Understorey trees
Description: Slatted timber/sub-frame sawn from spruce veneer, e.g. underneath a plank or similar product
Dimensions: Diameter <= 75 mm. Length <= 2600 mm
Humidity: <25 %
Common sizes: 75 x 75, 63 x 63, 60 x 60.
Manufacture also according to customer's dimensions
Special features: With or without planed hoop groove (pictured) if required. If required, also ISPM 15 treatment (stamped)
Intermediate and siderimats
Description: Sawn from spruce burl, with a lath and a siderail (wreath)
Dimensions: Width 40 / 46 mm. Thickness 10 / 12 mm. Length 700 - 1170 mm. As well as special sizes according to customer's request.
Humidity: <25 %
Board/packing board
Description: Packing board sawn from spruce veneer, for example for pallets, packing cases and support boards.
Dimensions: 17 x 75, 19×75, 21×75 mm and 16×68 mm, as well as according to the customer's request. Length 500-2550, most of them are delivered sawn to customer's dimensions.
Humidity: <25 %
Dry mortars
Description: Dry chippings sawn from spruce chips
Dimensions: Width 50 mm. Thickness 25/28/30/32 mm or according to customer's request. Length <= 2500 mm
Humidity: <25 %
Understorey trees in Kertalava
Description: The base of a single pallet frame, sawn from spruce burl.
Common sizes: 75 x 75, 44 x 75, 63 x 63, 42 x 74 and 42 x 63.
Length: 500-2500, the vast majority delivered sawn to customer specifications.
Humidity: <25 %
(Manufacture also according to customer's measurements). If required, also ISPM 15 processing (stamped).
